Assembly Of Drive Shaft - TOHATSU MFS25 Service Manual

Lower Unit

26) Assembly of Drive Shaft

Attach pinion nut (B gear nut) 1 to drive shaft 2 temporarily.
1.
Use a press to attach new drive shaft bearing to drive shaft 2.
2.
Bearing Installation Tool 3 :
P/N. 3AC-99900-0
• Do not press drive shaft thread a directly.
• Do not reuse bearing. Be sure to replace
with new one.
27) Disassembly of Gear Case
Remove taper roller bearing (outer race) 1.
1.
Attach puller claw in the direction as shown.
Slide Hammer Kit 2 :
P/N. 3AC-99080-0
Bevel Gear Bearing Puller Ass'y :
P/N. 3A3-72755-0
Remove spring guide 3.
2.
Remove needle bearing 4.
3.
Do not reuse removed bearing.
Before removing, check bearing for play or
deflection. Replace if necessary.
Needle Bearing Attachment 2 5 :
P/N. 3AD-99710-0
Driver Rod 2 6 :
P/N. 3AD-99702-0
6-18
CAUTION
CAUTION
1
2
a
1
2
1
6
5
4
3
2
3
6
4
25/30 2006