TOHATSU MFS25 Service Manual page 39

Functional Limit
5.46mm (0.2150in)
5.44mm (0.2142in)
5.55mm (0.2185in)
5.57mm (0.2193in)
0.070mm (0.00276in)
0.100mm (0.00394in)
2.0mm (0.08in)
2.0mm (0.08in)
33.5mm (1.32in)
25 : 23.60mm (0.9291in)
30 : 24.00mm (0.9449in)
Pulley Side : 17.95mm (0.7067in)
Oil Pump Side : 15.95mm (0.6280in)
0.09mm (0.0035in)
13.05mm (0.5138in)
12.94mm (0.5094in)
0.060mm (0.00236in)
Wear, Damage, Elongation
Wear, Damage, Deterioration Due To Gasoline
Wear, Deterioration, Damage
40.8mm (1.606in)
0.25mm (0.0098in)
14.96mm (0.5890in)
0.11mm (0.0043in) (Including oil pump cover wear)
0.16mm (0.0063in)
25/30 2006
Action To Be Taken
Adjust into specifid range.
Replace if less than specified limit.
Replace if over specified limit.
Replace if over specified limit.
Replace if over specified limit.
Replace if less than specified limit.
Replace if less than specified limit.
Replace if less than specified limit.
Replace if over specified limit.
Replace if over specified limit.
Replace if less than specified limit.
Replace if over specified limit.
Replace if necessary.
Check if rotating parts, sliding parts and sealing parts cause compression leakage.
Replace if out of specified range.
Replace if necessary.
Replace if out of specified range
Replace if necessary.
Replace if over specified limit.
Replace if over specified limit.
Replace if less than specified limit.
Replace if over specified limit.
Replace if over specified limit.
2
2-13