39) Removing Recoil Starter
Adjustment of Starter Lock Cable
1.
Shift gear into neutral (N).
Check that maximum diameter section of slide 1 is at neutral
2.
start mark 2.
3.
If not, adjust lower side of cable.
4.
Perform shift operation to check that recoil starter is locked
at other than neutral (N) position.
40) Disassembly of Recoil Starter
1.
Disconnect upper starter lock cable.
2.
Remove bolt, and then, recoil starter and belt cover.
Put rope in the groove of reel 1 and gently turn reel 1
3.
clockwise to release tension of starter spring.
Remove start shaft bolt 4, and then, friction plate 3 and
4.
spring 2.
5.
Take out reel carefully.
25/30 2006
1
2
1 Slide
2 Neutral Start Mark
1 Reel
2
2 Friction Spring
3 Friction Plate
4 Starter Shaft Bolt
5
1
4
1342
1342
1342
3
LIT
LIT
5-59