5) Pulling Out Upper Mount
1.
Pull out upper mount by using mount puller kit.
If it is seized, pull out only inner tube forcibly,
and then, split outer tube by using chisel to
remove it.
Mount Puller Kit :
P/N. 361-72760-0
6) Disassembly of Drive Shaft Housing
Remove engine base 2 from drive shaft housing ass'y 1.
1.
Remove plunger 3 from engine base ass'y 2.
2.
Remove oil strainer 4 from engine base ass'y 2.
3.
Before removing engine base ass'y, note
arrangement of oil strainer hose.
Remove water pipe 5 from drive shaft housing 1.
4.
25/30 2006
346-72761-0
345-72762-0
940191-1000
930191-1000
3
4
5
345-72763-0
2
7
1
1
7-17