Assembly Of Tilt Cylinder - TOHATSU MFS25 Service Manual

Bracket
Assemble new O-rings 9 and 0, coupling q, PTT motor
5.
ass'y 6 and reservoir tank 7, and tighten bolt 8 to
specified torque.
Reserve Tank Bolt :
5 N·m ( 4 lb·ft ) [ 0.5 kgf·m ]

24) Assembly of Tilt Cylinder

Put new O-ring 2 on the tilt cylinder 1.
1.
Put new dust seal 3 on the tilt cylinder 1.
2.
When putting parts in the inner tube, put them
from the other side of chamfered end of the
tube.
Put free piston first. Individual O-rings should be
arranged in their specific locations.
Put free piston 6, piston rod ass'y 4 and new O-rings 5
3.
and 7 in the inner tube 8.
Install inner tube ass'y in the tilt cylinder 1.
4.
7-28
6
9
1
3
2
1
1
4
5
6
7
a Chamfered End
5
4
8
7
0
q
8
a
25/30 2006