Remote Control Components; Remote Control Model - TOHATSU MFS25 Service Manual

Accessories
r/min

1.Remote Control Components

1) Installation of Remote Control Cable (Engine Side)

Remote Control Model

1. Turn hook lever on the bottom cowl downward and remove
top cowl.
Remove cable joint snap pins 3 and washers from throttle
2.
side 1 and shift side 2, and then, remove two cable joints.
3. Screw cable joint on the tip of remote control cable by
approximately 10mm. (10mm is equivalent to 9 threads.)
Shift cable is the one of which tip is moved earlier than
another cable when remote control lever 4 is set to forward
(F) side d until it stops once (approx. 32 degrees).
10-2
1
3
c
d
2
10mm
4
25/30 2006