Dell PowerConnect J-EX4200-24T Software Manual page 3237

Output Fields
show connections show connections
show connections brief
show connections <name> on page 3166
show connections remote-interface-switch on page 3166
show connections status on page 3167
Table 413 on page 3165 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 413: show connections Output Fields
Field Name Field Description
CCC and TCC Whether link monitoring is enabled:
connections [Link
Monitoring On I Off]
Connection or circuit status. See the output's legend for an explanation of the
Legend for Status
status field values.
(St)
Type of connection:
Legend for
connection types
if-sw
rmt-if
will display a state
Type of circuit:
Legend for circuit
types
intf
tlsp
rlsp
Connection/Circuit Name of the configured CCC connection.
Type Type of connection.
State of the connection.
St
Time that the connection or circuit last transitioned to the
Time last up
state.
Number of times that the connection or circuit has transitioned to the
# Up trans
(operational) state.
user@switch> show connections
Connection/Circuit
ge1-to-pe2
1
ge-0/0/5.0
lsp_pe1_to_ge1_pe2
lsp_pe2_to_ge1_pe1
user@switch> show connections brief
Chapter 125: Operational Mode Commands for MPLS
—Layer 2 switching cross-connect.
—Remote interface switch. While graceful restart is in progress,
(St) of Restart
—Interface circuit.
—Transmit LSP circuit.
—Receive LSP circuit.
Type St
rmt-if Up
intf Up
tlsp Up
rlsp Up
command.
show connections
On or Off .
.
(operational)
Up
Time last up # Up trans
Jun 26 18:37:25
rmt-if
Up
3165