Show Link-Management - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show link-management

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 414: show link-management Output Fields
Field Name
Peer Name
System identifier
State
Control address
CC local ID
CC remote ID
State
TxSeqNum
RcvSeqNum
3168
show link-management
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display Multiprotocol Label Switching (MPLS) peer and traffic engineering link information.
This command has no options.
view
show link-management peer on page 3171
show link-management routing on page 3173
show link-management statistics on page 3176
show link-management te-link on page 3178
show link-management on page 3170
Table 414 on page 3168 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Name of the peer.
Internal identifier for the peer. The range of values is
State of the peer: or
Up
Address to which a control channel is established.
Identifier assigned to the control channel by the local peer. The range of values is
.
4,294,967,296
Identifier assigned to the control channel by the remote peer. The range of values is
4,294,967,296 .
State of the control channel:
Sequence number of the hello message being sent to the peer. The range of values is
.
4,294,967,295
Sequence number of the last hello message received from the peer. The range of values is
through
0 4,294,967,295.
0
.
Down
Up or Down .
show link-management command.
through .
64,000
through
1
1
1
through
through