Korg Pa4X User Manual page 662

648| Effects for the Sounds
a LFO Waveform
LFO Shape
b LFO Phase [de-
gree]
c LFO Frequency
[Hz]
Src
Amt
d MIDI Sync
BPM
Base Note
Times
e Depth
Src
Amt
f Wet/Dry
Src
Amt
a: LFO Shape
You can change the panning curve by modifying the LFO's Shape.
b: LFO Phase [degree]
This determines the phase difference between the left and right LFOs. When
you gradually change the value away from 0, the sounds from the left and
right channels will seem to chase each other around. If you set the parame-
ter to +180 or –180, the sounds from each channel will cross over each other.
Triangle, Sine Selects the LFO Waveform
–100...+100 Changes the curvature of the LFO Waveform
–180...+180 Sets the LFO phase difference between the
left and right
0.02...20.00 Sets the speed of the LFO
Off...Tempo Selects a modulation source for LFO speed
–20.00... Sets the modulation amount of LFO speed
+20.00
Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
MIDI, MIDI syncs to the system tempo; 40–300 sets
40.00... the tempo manually for this individual effect
300.00
Selects the type of notes that specify the LFO
...
speed
x1...x32 Sets the number of notes that specify the LFO
speed
0...100 Sets the depth of LFO modulation
Off...Tempo Selects the modulation source of the depth of
modulation
–100...+100 Sets the modulation amount of the depth of
modulation
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source