Korg Pa4X User Manual page 366

352| Customizing, recording and editing the Songs
4 If you want to use the advanced parameters, allowing you to select a velocity
curve and create fade-ins or fade-outs, select the
When this parameter is selected, the Intensity, Curve,
and End Velocity Value
▪
Use the Intensity
will be adjusted toward the curve you specify with Curve.
Intensity
0 ... 100%
▪
Use the Curve
velocity will change over time.
Start Value = 0%, End Value = 100%
Curve 1
127
Velocity
1
Start End
Value Value
Curve 4
127
Velocity
1
Start End
Value Value
▪
Use the Start Vel. Value
the starting and ending of the selected curve.
Intensity
0 ... 100%
5 Use the Start Tick
of the phrase to be edited.
If a phrase is four measures long, and you want to select it all, the Start will
be positioned at 1.01.000, and the End at 5.01.000.
6 Use the Bottom Note
If you select the same note as the Bottom and Top parameters, you can se-
lect a single percussive instrument in a Drum Kit. Selecting a range can also
be used to only edit RX Noises (from C7) or ordinary notes (under C7).
7 After having set the various parameters, touch Execute.
parameters become accessible.
parameter to specify the degree to which the velocity data
Meaning
Intensity value. With a setting of 0%, the velocity will not change.
With a setting of 100%, the velocity will be changed the most.
parameter to select one of the six curves, and specify how the
Curve 2
127
Velocity
1
Start End
Value Value
Curve 5
127
Velocity
1
Start End
Value Value
and End Vel. Value
Meaning
Velocity change in percentage
and End Tick
and Top Note
Curve 3
127
Velocity
1
Start End
Value Value
Curve 6
127
Velocity
RANDOM
1
Start End
Value Value
to change the velocity value at
parameters to set the beginning and ending
parameters to set key range to change.
Advanced checkbox.
Start Velocity Value