Position the input pointer
▪
The
Pos
parameter shows the current position. This is where you will insert
the next event.
▪
If you do not want to insert a note or chord at the current position, insert a
rest instead, as shown below.
▪
To jump to the next measure, filling the remaining beats with rests, touch the
Next M.
button.
Choose a step value
▪
Use the
Step Time
Choose the relative note duration
▪
Use the
Duration
age is always referred to the step value.
Duration
50%
85%
100%
Choose the note velocity
▪
Use the
Velocity
event to be inserted.
Velocity
Kbd
1 ... 127
Insert a note or rest at the current position
▪
To insert a single note, play it on the keyboard. The inserted note length will
match the step length. You may change the velocity and relative duration of
the note, by editing the
▪
To insert a rest, touch the
values to choose the step value.
parameter to set the relative note duration. The percent-
Meaning
Staccato
Ordinary articulation
Legato
parameter to set the velocity or playing strength of the
Meaning
Keyboard. Select this parameter by turning the VALUE controls com-
pletely counter-clockwise. When this option is selected, the playing
strength of the played note is recognized and recorded.
Velocity value. The event will be inserted with this velocity value,
and the actual playing strength of the note played on the keyboard
will be ignored.
Duration
and
Rest
button. Its length will match the step value.
Recording the Styles and Pads |255
Velocity
parameters.