Korg Pa4X User Manual page 364

350| Customizing, recording and editing the Songs
Transposing
The transpose function may be used to transpose the selected track(s).
1 Go to the Sequencer > Song Edit > Transpose
2 Select the Track
track
All
Track 1 ... 16
3 Use the Value
Value
-127 ... 127
4 Use the Start Tick
of the phrase to be transposed.
If a phrase is four measures long, and you want to select it all, the Start will
be positioned at 1.01.000, and the End at 5.01.000.
5 Use the Bottom Note
pose.
If you select the same note as the Bottom and Top parameters, you can se-
lect a single percussive instrument in a Drum Kit. Since in a Drum Kit each
instrument is assigned to a different note of the scale, transposing a percus-
sive instrument means assigning the part to a different instrument.
Selective transpose can also be used to avoid transposing RX Noises (trans-
posing only notes under C7).
to edit.
Meaning
All tracks selected, apart for the tracks set in Drum mode (like the
Drum and Percussion tracks).
Selected track.
parameter to choose the transpose value.
Meaning
Transpose value (in semitones)
and End Tick
and Top Note
page.
parameters to set the beginning and ending
parameters to set key range to trans-