Korg Pa4X User Manual page 721

Mic Model+PreAmp (Mic Modeling + PreAmp)
This effect simulates a mic and vacuum tube preamp. You can choose from
various types of mic and positions to create differing sonic characters.
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
Left
+
Mic Simulation
Right
a Mic Type
b Mic Position
c Tube Low Cut [Hz]
High Cut [Hz]
d Tube Gain [dB]
Saturation [%]
e Tube Bias
f Tube Output Level [dB]
g Wet/Dry
Src
Amt
b: Mic Position
This expresses the effect that the mic position has on the sound. The Close
setting is the closest mic position, and the Far setting is the farthest.
Tube Pre Amp
Output Level
Vintage Dynamic, Multi
Condenser, Percussion
Condenser, Drums
Dynamic,
Vocal Dynamic,
Multi Dynamic, Vocal
Condenser, Vocal Tube,
Kick Dynamic
Close, On, Off, Far
Thru, 21...8.00k
53...20.00k, Thru
–24.0...+24.0
0...100
0...100
–48.0...+0.0
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Effect parameters |707
FX Amt
FX Amt
Selects the type of mic
Sets the mic placement dis-
tance
Sets the frequency of the low
cut filter
Sets the frequency of the high
cut filter
Sets the input gain to the vacu-
um tube preamp
Sets the input/output
sponse of the preamp
Sets the bias level of the preamp
Sets the output level of the
preamp
Balance between the wet and
dry signal
See DMS (Dynamic Modulation
Source)
Amount of modulation source
re-