Korg Pa4X User Manual page 559

Editing the filter parameters
▪
Use the Routing
into the signal path.
routing
Off
Lead
Harm+Double
Voices
Harmony FX
Lead FX
▪
Use the Low Cut / Hi Cut
very steep low and high shelving filters.
▪
Use the Gate Threshold
This gate is separate from the main Gate applied to the microphone input,
and is used to help prevent feedback when using the Filter with presence
filtering that can introduce feedback in a live environment. This parameter
sets how loud you must sing in order to open the gate.
pop-up menu to specify where the Filter effect is inserted
Meaning
No routing.
Filter is inserted on the Lead voice only. Harmonies and Doubling
are unaffected.
Filter is inserted on the Harmony+Double path only.
Filter is inserted on both the Lead, Harmony and Doubling voices.
Filter is inserted on the Harmony send to the effects. Lead and
Harmony voices will be clean.
Filter is inserted on the Lead send to the μMod, Delay and Reverb
effect sends. Lead voice will be clean.
parameters to set the cut-off frequency for these
parameter to prevent feedback.
Editing the Voice effects |545