Korg Pa4X User Manual page 937

Loading data from other instruments
Loading Global data from Pa-Series instruments
Being unique to each instrument, Global data (Preferences, MIDI Presets,
MaxxAudio settings, etc.) can't be loaded from other KORG Pa-Series instru-
ments. They are therefore discarded when loading a SET folder generated
by an instrument other than Pa4X.
Loading data from Pa-Series instruments
You can load most data from KORG Pa-Series instruments. The following
table shows what you can load from the other instruments.
Please keep in mind that, depending on the actual data, you could not be
able to directly load SET folders; in this case, open the folder, and load each
bank or individual item separately.
After loading, save the converted data as a new SET folder after loading all
the needed data.
Load from
Pa3X
Loaded data
You can load most data as if they were Pa4X data. There are however a
few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Due to the different order in memory, Factory Styles must be manu-
ally reassigned to SongBook Entries by using the KORG
software.
• Favorite Style banks over #10 are missing and are not loaded. Since
Pa4X banks are larger, load the individual Styles into the additional loca-
tions of the other banks.
• Performance banks over #11 are missing and are not loaded. Since
Pa4X Keyboard Set banks are larger, load the individual Performances
into the additional locations of the other banks.
• Since the number of Insert and Master FX is different, the effects con-
figuration can be different.
• Voice Processor Presets with the MP3 Audio harmony type are reset.
• Global settings are not loaded.
Managing files |923
SongBook Editor