Korg Pa4X User Manual page 590

576| Effects for the Sounds
h Wet/Dry
Src
Amt
e: High Damp [%]
e: Low Damp [%]
These parameters set the damping amount of high range and low range. The
tone of the delayed sound becomes darker and lighter as it feeds back.
g: Spread
This parameter sets the pan width of the effect sound. The stereo image is
widest with a value of 50, and the effect sound of both channels is output
from the center with a value of 0.
Stereo/CrossDelay
This is a stereo delay, and can by used as a cross-feedback delay effect in
which the delay sounds cross over between the left and right by changing
the feedback routing.
Stereo In - Stereo Out
Left
Input Level D-mod
Stereo/Cross
Input Level D-mod
Right
a Stereo/Cross
b L Delay Time [msec]
c R Delay Time [msec]
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
High Damp Low Damp
Delay
Feedback
High Damp Low Damp
Delay
Stereo, Cross
0.0...1360.0
0.0...1360.0
FX Amt
Spread
Stereo/Cross
FX Amt
Switches between stereo delay and
cross-feedback delay
Sets the delay time for the left channel
Sets the delay time for the right chan-
nel