Converting notes to RX Noises
You can go to the
RX Noises, and vice-versa. This will help programming Songs on an external
sequencer.
1
Go to the
Sequencer > Song Edit > Utility
2
Edit the parameters, and choose the commands.
▪
Use the
Track
to set the volume level of the RX Noises in the selected track(s). When done,
touch the
Execute
track
All
Track 1 ... 16
▪
Touch the
Execute
automatically analyze the Standard MIDI File, and add RX Noises to Guitar
tracks.
This command scans the whole Standard MIDI File, looking for guitar strum-
ming played by nylon, steel or electric guitars. After scanning, a suitable
Guitar sound will be automatically assigned to the relevant tracks, and RX
Noises automatically added where needed.
▪
Touch the
Execute
convert the RX Noises to ordinary MIDI Notes.
▪
Touch the
Execute
to convert all the relevant MIDI Notes to RX Noises.
Utility
page to convert notes of a Standard MIDI File into
parameter to choose a track, then use the
button.
Meaning
All tracks.
Selected track.
button next to the
button next to the
button next to the
Editing the MIDI Songs |357
page.
Add to Guitar Tracks
Convert to MIDI Notes
Convert from MIDI Notes
Velocity
parameter
parameter to
parameter to
parameter