Korg Pa4X User Manual page 659

a Autofade Src
Fade-In Delay [msec]
Rate
b LFO Frequency Mod
Wet/Dry Mod
c LFO Waveform
LFO Shape
d LFO Phase [degree]
e LFO Frequency [Hz]
Src
Amt
f L Delay Time [msec]
R Delay Time [msec]
g Depth
h Feedback
High Damp [%]
i Wet/Dry
Src
Amt
Off...Tempo Selects the modulation source that
starts AutoFade
00...2000 Sets the fade-in delay time
1...100 Sets the rate of fade-in
D-mod, Switches between D-mod and AUTOFADE
AUTOFADE for the LFO frequency modulation
D-mod, Switches between D-mod and AUTOFADE
AUTOFADE for the effect balance modulation
Triangle, Sine Selects the LFO Waveform
–100...+100 Changes the curvature of the LFO
Waveform
–180...+180 Sets the LFO phase difference between
the left and right
0.02...20.00 Sets the speed of the LFO
Off...Tempo Selects a modulation source for LFO
speed
–20.00... Sets the modulation amount of LFO
+20.00 speed
0.0...500.0 Sets the left channel delay time
0.0...500.0 Sets the right channel delay time
0...200 Sets the depth of LFO modulation
–100...+100 Sets the feedback amount
0...100 Sets the feedback damping amount in
the high range
-Wet, -1:99... Balance between the wet and dry signal
Dry...99:1, Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |645