Korg Pa4X User Manual page 589

DEL (Delay)
L/C/R Delay
This multitap delay outputs three Tap signals to the left, right, and center
respectively. You can also adjust the left and right spread of the delay sound.
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In -Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
a L Delay Time
[msec]
Level
b C Delay Time
[msec]
Level
c R Delay Time
[msec]
Level
d Feedback
(C Delay)
Src
Amt
e High Damp [%]
Low Damp [%]
f Input Level
Dmod [%]
Src
g Spread
L Delay
Level
C Delay
Level
Feedback
R Delay
Level
0...2730 Sets the delay time of TapL
0...50 Sets the output level of TapL
0...2730 Sets the delay time of TapC
0...50 Sets the output level of TapC
0...2730 Sets the delay time of TapR
0...50 Sets the output level of TapR
–100...+100 Sets the feedback amount of TapC
Off...Tempo Selects the modulation source of the TapC
feedback amount
–100...+100 Sets the modulation amount of the TapC feed-
back amount
0...100 Sets the damping amount in the high range
0...100 Sets the damping amount in the low range
–100...+100 Sets the modulation amount of the input level
Off...Tempo Selects the modulation source for the input
level
0...50 Sets the width of the stereo image of the effect
sound
Effect parameters |575
FX Amt
Spread
FX Amt