Korg Pa4X User Manual page 384

370| Customizing, recording and editing the Songs
Setting the language on the Pa
To correctly read text on your Pa, be sure to set the
your language. This can be done in the
page.
1 Since the instrument must be restarted at the end of this procedure, be sure
to first save any unsaved data.
2 While in the Interface
3 The Change command will start flashing. Touch it.
4 A message will ask you to reboot the instrument. Touch
sage window.
5 Turn the instrument off, then on again.
Editing the TXT file on a Windows PC
1 Launch Notepad++.
2 Open the original TXT file.
3 Choose File > New
4 Choose Encoding > Character sets > [Your Language] >
5 Click on the tab containing the original TXT file.
page, select a language from the popup menu.
to open a new tabbed window containing the new TXT file.
Language
Global > General Controls > Interface
OK
parameter to
to close the mes-
[Encoding].