Korg Pa4X User Manual page 453

When Intensity has a positive (+) value, a setting of + for this parameter will
allow the AMS to raise the EG level, and a setting of – will allow AMS to lower
the EG level. With a setting of 0 there will be no change.
Amp 1 EG changes (Level) (AMS=Velocity, Intensity = a positive (+) value)
Note-on
Note-off
Softly played note when Start Level
Swing=0 and Attack Level Swing
and Break Level Swing are set to +
Modulating the Amp EG times
▪
Use the Time Modulation > AMS 1/2
source for the Time parameters of the Amp EG.
▪
Use the Time Modulation > Intensity
depth and direction of the effect that the AMS will have on the Time param-
eters. With a setting of 0, the Amp EG times will be just as specified by the
Time settings.
For example, if the AMS is Amp KTrk +/+, the (Amp) Keyboard Track settings
(in the Edit Sound > Amp > Amp Mod
eters. With positive (+) values of this parameter, positive (+) values of Ramp
(Ramp Setting) will cause EG times to be lengthened, and negative (–) values
of Ramp (Ramp Setting) will cause EG times to be shortened. The direction
of the change is specified by the At (Attack Time Swing), Dc (Decay Time
Swing), Sl (Slope Time Swing), and Rl (Release Time) parameters.
If the AMS is set to Velocity, positive (+) values of this parameter will cause
EG times to lengthen as you play more strongly, and negative (–) values will
cause EG times to shorten as you play more strongly. With a setting of 0, the
EG times will be as specified by the Level parameters.
▪
Use the At (Attack Time
Swing) and Rl (Release Time Swing)
in which the AMS will affect the Time > Attack, Decay, Slope and Release
parameters.
Note-on
Note-off
Strongly played note when Start Level
Swing=0 and Attack Level Swing and
Break Level Swing are set to +
Swing),
Editing the Sounds |439
Note-on
Note-off
Strongly played note when Start Level
Swing=0 and Attack Level Swing and
Break Level Swing are set to +
parameters to select a modulation
parameters (-99...+99) to specify the
page) will control the EG Time param-
Dc (Decay Time
parameters to specify the direction
Swing), Sl (Slope Time