Korg Pa4X User Manual page 452

438| Customizing and editing the Sounds
▪
Use the Time
level is reached.
EG time
Attack
Decay
Slope
Release
Modulating the Amp EG
Modulating the Amp EG levels
▪
Use the Level Modulation > AMS
for the Level parameters of the Amp EG.
▪
Use the Level Modulation > Intensity
depth and direction of the AMS.
For example, if the AMS is Velocity, setting St (Start Level Swing), At (Attack
Level Swing) and Br (Break Point Level Swing) parameters to + and setting
Intensity to a positive (+) value, will cause the amp EG volume levels to in-
crease as you play more strongly. Setting Intensity to a negative (–) values
will cause the amp EG volume levels to decrease as you play more strongly.
With a setting of 0, the levels will be as specified on
▪
Use the St (Start Level
Swing) parameters to specify the direction in which AMS will affect the Level
> Start, Attack and Break Point levels.
parameters (0...99) to specify the time over which the volume
Meaning
Time over which the volume will change after note-on until it reaches
the attack level. If the start level is 0, this will be the rise time of the
sound.
Time over which the volume will change from when it reaches the
attack level until it reaches the break point level.
Time over which the volume will change from when it reaches the
break point level until it reaches the sustain level.
Time over which the volume will change after note-off until it reach-
es 0.
Swing),
parameter to select a modulation source
parameters (-99...+99) to specify the
At (Attack Level Swing)
Amp > Amp EG.
and Br (Break Level