Korg Pa4X User Manual page 648

634| Effects for the Sounds
c MIDI Sync
BPM
Base Note
Times
d Phaser Manual
Resonance
e Phaser Depth
Src
Amt
f Phaser Wet/Dry
g Tremolo Shape
h Tremolo Depth
Src
Amt
i Wet/Dry
Src
Amt
a: Type
a: LFO Phase [degree]
Select the type of phaser LFO and tremolo LFO for the "Type" parameter.
How the effect sound moves or rotates depends on the type of LFO. Select-
ing "LFO Phase" enables you to offset the timing of the phaser peak and
control a subtle movement and rotation of the sound.
Off, On When this is on, the LFO speed is set
by BPM, Base Note, and Times, instead
of Frequency
MIDI, MIDI syncs to the system tempo; 40–
40.00... 300 sets the tempo manually for this
300.00 individual effect
Selects the type of notes that specify
...
the LFO speed
x1...x32 Sets the number of notes that specify
the LFO speed
0...100 Sets the phaser frequency range
–100...+100 Sets the phaser resonance amount
0...100 Sets the phaser modulation depth
Off...Tempo Selects the modulation source for the
phaser modulation depth
–100...+100 Sets the modulation amount for the
phaser modulation depth
–Wet, –2 : 98... Sets the balance between the phaser
Dry... 2 : 98, Wet effect and dry sounds
–100...+100 Sets the degree of the tremolo LFO
shaping
0...100 Sets the tremolo modulation depth
Off...Tempo Selects the modulation source for the
tremolo modulation depth
–100...+100 Sets the modulation amount of the
tremolo modulation depth
Dry, 1:99...99:1, Balance between the wet and dry
Wet signal
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source