Korg Pa4X User Manual page 1092

1078| Appendix
assembling the stand (St-SV1 BK)
You can use the KORG ST-SV1 BK stand as a steady support for your Pa4X.
Precautions before assembly
Before you begin to assemble the stand, please keep the following in mind:
▪
To assemble the stand, two people are strongly suggested. Failing to do so
may damage the instrument and cause injury.
▪
When placing the instrument on the stand, be careful not to pinch your
hands.
▪
Be sure to follow the steps in order, and make sure that the parts are as-
sembled in the correct orientation and position.
▪
Do not apply weight to the edge of the instrument before tightening the
screws, otherwise it may fall down.
Assembly instructions
1 Open the packing carton and take out the contents. Remove the stand (B)
from the package by grabbing it by the four brackets (a). Lay it on the ground,
with the legs on top (see illustration).
2 Remove the protective sheet, and keep it in a safe place for future use.
a a
a a
B