Korg Pa4X User Manual page 444

430| Customizing and editing the Sounds
Modulating the Filter EG
Modulating the Filter EG levels
▪
Use the Level Modulation > AMS
control the Level parameters of the filter EG.
▪
Use the Level Modulation > Intensity
depth and direction of the AMS. With a setting of 0, the levels specified by
the Frequency
For example, if AMS is Velocity, and you set St (Start Level Swing), At (Attack
Level Swing) and Br (Break Level Swing) to + and set Intensity to a positive
(+) value, the EG levels will rise as you play more strongly. If Intensity is set to
a negative (–) value, the EG levels will fall as you play harder.
▪
Use the St (Start Level
Swing) parameters to specify the direction in which AMS will affect the Start,
Attack and Break Point.
When Intensity has a positive (+) value, a setting of + for this parameter will
allow the AMS to raise the EG level, and a setting of – will allow AMS to lower
the EG level. With a setting of 0 there will be no change.
Filter 1 EG changes (level) (AMS = Velocity, Intensity = a positive (+) value)
Note-on
Note-off
Softly played note with Start
Level Swing, Attack Level Swing,
and Break Level Swing set to +
parameter will be used.
Swing), At (Attack Level Swing)
Note-on
Note-off
Strongly played note with Start
Level Swing, Attack Level Swing,
and Break Level Swing set to +
parameter to select the source that will
parameters (-99...+99) to specify the
Note-on
Note-off
Strongly played note with Start
Level Swing, Attack Level Swing,
and Break Level Swing set to –
and Br (Break Level