Korg Pa4X User Manual page 498

484| Customizing and editing the Sounds
Creating new Sounds from multisamples
You can create a new Sound while in
1 Go to the Sound
2 Choose a Sound
If you prefer to start from a blank, default situation, choose the
Sound command from the
3 Go to the Sound > Basic > OSC
4 Select one of the available
side of the page.
5 Use the parameters in the
ple to the High
can be found in the
6 Go on editing the Sound, as shown in the pages dedicated to Sound editing.
mode.
similar to the one you are going to create.
page menu.
page.
oscillators
OSC Multisample
or Low layer of the selected oscillator. Your new multisample
RAM bank of multisamples.
Sound mode.
from the radio buttons on the right
section to assign the multisam-
Initialize