Korg Pa4X User Manual page 596

582| Effects for the Sounds
St. Dynamic Delay (Stereo Dynamic Delay)
This stereo delay controls the level of delay according to the input signal
level. You can use this as a ducking delay that applies delay to the sound only
when you play keys at a high velocity or only when the volume level is low.
Stereo In - Stereo Out
Left
Right
+
a Control Target
Polarity
b Threshold
Offset
c Attack
d Release
e L Delay Time [msec]
f R Delay Time [msec]
g Feedback
h High Damp [%]
Low Damp [%]
i Spread
j Wet/Dry
Src
Amt
High Damp Low Damp
Delay
Feedback
High Damp Low Damp
Delay
FB
Attack, Release
Envelope
Threshold
None, Out, FB
+, –
0...100
0...100
1...100
1...100
0.0...1360.0
0.0...1360.0
–100...+100
0...100
0...100
–100...+100
Dry, 1:99...99:1,
Wet
Off...Tempo
–100...+100
FX Amt
Spread
FX Amt
Out
Control Target
Selects from no control, output, and feed-
back
Reverses level control
Sets the level to which the effect is ap-
plied
Sets the offset of level control
Sets the attack time of level control
Sets the release time of level control
Sets the delay time for the left channel
Sets the delay time for the right channel
Sets the feedback amount
Sets the damping amount in the high
range
Sets the damping amount in the low range
Sets the width of the stereo image of the
effect sound
Balance between the wet and dry signal
See DMS (Dynamic Modulation Source)
Amount of modulation source