Korg Pa4X User Manual page 502

488| Customizing and editing the Sounds
Slicing
1 Go to the Sampling > Time Slice
2 Use the Meter
3 Use the Measure
nal sample. Usually, you will load a groove 1- or 2-measures long.
4 The BPM (Beats Per Minute) parameter specifies the tempo (in Beats Per
Minute) of the original sample. This value is automatically calculated, based
on the Start, End,
If you know these data, manually enter the Meter,
rameters, to make the slicing more accurate. The
adjusted to values lower than the one automatically calculated. This can
be useful, for example, when the actual sample is shorter than the entered
Meter and Measures
Meas.1 Meas.2
In the example above, the actual groove lasts only up to the first half of
Measure 2. The recognized tempo is 130, while the real tempo is 100. Set the
BPM value to 100, and a rest will be added to the end of the groove, to allow
it to loop seamlessly.
5 Touch the Slice
parameter to specify the Meter of the original sample.
parameter to specify the number of measures of the origi-
Meter and Measures
values.
button to slice the original audio groove.
page.
parameters.
Measures and BPM
BPM value can be only
pa-