Korg Pa4X User Manual page 499

Creating new Drum Kits from percussive
samples
You can create a new Drum Kit while in
1 Go to the Sound
2 Choose a Drum Kit
If you prefer to start from a blank, default situation, choose the
Sound command from the
3 Go to the Sound > DrumKit > DrumKit
4 Use the KEY parameter to select a key. As an alternative, select it by press-
ing a key on the keyboard.
5 Select one of the available
diagram.
6 Use the parameters in the
current layer or the selected oscillator. Your new sample can be found in the
RAM bank of samples.
7 Go on editing the Drum Kit, as shown in the pages dedicated to Sound edit-
ing.
mode.
similar to the one you are going to create.
page menu.
layers from the radio buttons under the keyboard
Drum Sample
Making new sounds with Sampling |485
Sound mode.
page.
section to assign a sample to the
Initialize