Korg Pa4X User Manual page 772

758| Effects for the Sounds
Scratch
This effect is applied by recording the input signal and moving the modula-
tion source. It simulates the sound of scratches you can make using a turn-
table.
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
Left
+
Right
D
-mod
a Scratch Source
b Response
c Envelope Select
Src
d Threshold
e Response
f Direct Mix
g Wet/Dry
Src
Amt
Scratch
Rec Control
D-mod
Envelope Control
Input
Envelope Select
D
-mod
Off...Tempo
0...100
D-mod, Input
Off...Tempo
0...100
0...100
Always On,
Always Off,
Cross Fade
Dry, 1:99...99:1,
Wet
Off...Tempo
–100...+100
Direct
Mix
Scratch
Selects the modulation source for simulation
control
Sets the speed of the response to the Scratch
Src
Selects whether the start and end of record-
ing is controlled via the modulation source or
the input signal level
Selects the modulation source that controls
recording when Envelope Select is set to
D-mod
Sets the recording start level when Envelope
Select is set to Input
Sets the speed of the response to the end of
recording
Selects how a dry sound is mixed
Balance between the wet and dry signal
See DMS (Dynamic Modulation Source)
Amount of modulation source
FX Amt
FX Amt