Korg Pa4X User Manual page 673

h Wet/Dry
Src
Amt
a: Envelope Select
This parameter selects whether the left and right channels are linked to
control both signals simultaneously, or whether each channel is controlled
independently.
b: Sensitivity
g: Output Level
The "Sensitivity" parameter sets the sensitivity of the compressor. If this
parameter is set to a higher value, lower level sounds will be boosted. With
a higher Sensitivity, the overall volume level is higher. To adjust the final
volume level, use the "Output Level" parameter.
Level
Wet
Dry
c: Attack
This parameter controls the attack level.
Level
Attack=80
Attack=20
Dry
Dry, 1:99...99:1, Sets the Balance between the wet and
Wet dry signal
Off...Tempo Selects a modulation source for Wet/Dry
–100...+100 Sets the modulation amount for Wet/Dry
Compressor - Sensitivity
Sensitivity=100
Sensitivity=40
Time
Compressor - Attack
Wet
Time
Effect parameters |659