Korg Pa4X User Manual page 1023

The following table explains the meaning of the DNC controls.
DNC Control
Legato (In)
Legato (Out)
SC1 Note On
SC1 Note Off
SC2 Note On
SC2 Note Off
Y+
Y–
After Touch
Depending on the chosen Sounds and the assigned DNC functions, the SC1, SC2
and Y– controllers can either 'book' a function, that will be triggered while play-
ing, or enable (or disable) it by pressing the button to 'toggle' it. When an SC1
or SC2 controller is assigned to an assignable switch, the indicator will show the
DNC controllers status.
Indicator status
Off
Red steady
Red blinking
Green steady
Green blinking
Meaning
Playing legato inside the Legato range (as defined in the Sound > Basic >
Sound page, and shown in the previous table)
Playing legato out of the Legato range
Sound Controllers 1 & 2 (SC1, SC2) are MIDI controllers that can be as-
signed to a physical control (assignable switch, footswitch, EC5 switch).
They can be activated either by a Note On or a Note Off message.
For example, imagine you are playing an Accordion DN1-type Sounds, and
SC1 is assigned to an assignable switch. The SC1 controller is programmed
as a 'booking'-type control in Sound Edit (Sound > Basic > Sound page),
therefore it will affect the next Note On or Note Off event. If you press the
switch before playing a note (Note On), a Riff Up will be triggered when
playing a note. If you press the switch while the note is playing, a Fall Down
will be triggered when releasing the note (Note Off).
Downward movement of the Joystick
Downward movement of the Joystick
Deeper press on the key
Meaning
No DNC function assigned.
Booking DNC function available.
Booking DNC function waiting to be executed. Then, it will return steady.
Toggle DNC function available.
Toggle activated. Press it again to disable it.
Musical Resources |1009