Korg Pa4X User Manual page 605

d L Feedback
Src
Amt L
e R Feedback
Amt R
f High Damp [%] 0...100
g Low Damp [%] 0...100
h Input Level
Dmod [%]
Src
i Wet/Dry
Src
Amt
a: Time Over? L, R
You can set the delay time up to 2,730msec. If the delay time exceeds this
limit, the error message "OVER!" appears in the display. Set the delay time
parameters so that this message will not appear. "Time Over?" is only a
display parameter.
–100...+100 Sets the feedback amount for the left channel
Off...Tempo Selects the modulation source of feedback amount
–100...+100 Sets the modulation amount of the left channel
feedback
–100...+100 Sets the feedback amount for the right channel
–100...+100 Sets the modulation amount of the right channel
feedback
Sets the damping amount in the high range
Sets the damping amount in the low range
–100...+100 Sets the modulation amount of the input level
Off...Tempo Selects the modulation source for the input level
Dry, Balance between the wet and dry signal
1:99...99:1,
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |591