Korg Pa4X User Manual page 1096

1082| Appendix
9 If the instrument and the stand are correctly aligned, the screws (j) should
fit into the threaded nuts of the holes (k). If this does not happen, align the
instrument and stand again. Once the screws are inside the threaded nuts,
tighten them to attach the instrument to the stand.
A
B
10 Be sure all screw are tightened, and all brackets correctly inserted.
11 Place the instrument in the location where it will be played.
Precautions after assembly
Use caution when transporting the instrument
Remove the instrument from its stand, and transport them separately.
Please use the included loop fastener tapes to secure the stand legs dur-
ing transport and avoid any damage. After transportation, refer to these
instructions and re-assemble the instrument and stand.
Loosening of the screws
After assembly, the various screws and bolts of the stand may loosen as time
goes by, causing the stand to wobble. If this occurs, re-tighten the screws.
k
j
j