Korg Pa4X User Manual page 616

602| Effects for the Sounds
d Loop Base Note
Times
e REC Control Src
f RST Control Src
g Manual REC Control
h Manual RST Control
i Pan
Src
Amt
j Wet/Dry
Src
Amt
a: Loop Time [msec]
With Auto, the loop time is automatically set. Otherwise, you can specify the
loop time.
When Auto is selected, the Loop Time is automatically set to the time it takes
for a performance recorded while the Modulation Source or "Manual REC
Control" is on. However, if the time length exceeds 10,800msec, the loop
time will be automatically set to 10,800msec.
c: Time Over?
You can set the delay time up to 10,800msec. If the delay time exceeds this
limit, the error message "OVER!" appears in the display. Set the delay time
parameters so that this message will not appear. "Time Over?" is only a
display parameter.
Selects the type of notes to specify the
...
delay time
x1...x32 Sets the number of notes to specify the
delay time
Off...Tempo Selects control source for recording
Off...Tempo Selects control source for reset
REC Off, Sets the recording switch
REC On
Off, RESET Sets the reset switch
L100...L1, C, R1... Sets the stereo image of the effect
R100
Off...Tempo Selects the modulation source of ste-
reo image of the effect
–100...+100 Sets the modulation amount of stereo
image of the effect
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source