Korg Pa4X User Manual page 624

610| Effects for the Sounds
e R Feedback
R Amt
f High Damp [%]
g Low Damp [%]
h Input Level Dmod [%]
Src
i Wet/Dry
Src
Amt
a: Time Over? L, R
You can set the delay time up to 5,460msec. If the delay time exceeds this
limit, the error message "OVER!" appears in the display. Set the delay time
parameters so that this message will not appear. "Time Over?" is only a
display parameter.
–100...+100 Sets the feedback amount for the right
channel
–100...+100 Sets the modulation amount of the
right channel feedback
0...100 Sets the damping amount in the high
range
0...100 Sets the damping amount in the low
range
–100...+100 Sets the modulation amount of the in-
put level
Off...Tempo Selects the modulation source for the
input level
Dry, 1:99...99:1, Balance between the wet and dry sig-
Wet nal
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source