Korg Pa4X User Manual page 561

Editing the μMod effect
While in the Voice Preset > uMod
lation effect.
μMod is short for micro-modulation. The μMod effect is capable of creating
many different sounds that range from subtle but lush thickening to cre-
atively destructive. It uses a combination of stereo pitch shifting (Detune),
small amounts of stereo delay (Delay), and then a complex path of filtering,
feedback, and modulation. μMod does a faithful job of emulating classic de-
tune, chorus, flange and thickening sounds.
Choosing the μMod set
pop-up menu to choose settings for the μMod block.
▪
Use the Set
Adjusting the level
▪
Use the Level
Editing the μMod parameters
▪
Use the Speed
In order for this to be audible, the depth amount parameter has to be non-
zero. The setting range is 10.00 Hz (very fast) to .05 Hz (very slow).
▪
Use the Detune L/R
the left or right sides independently. This setting is shown in cents and the
maximum is +/- 25 cents.
▪
Use the Depth L/R
time for the left and right delays. If one delay is set to 10mS, for example, a
setting of 50% will vary the delay time between 15mS and 5mS at the rate
set by the Speed parameter.
parameter to adjust the level for the μMod effect.
parameter to set how fast the delay time modulation occurs.
parameters to apply a small amount of pitch shift to
parameters to set the amount of modulation of the delay
Editing the Voice effects |547
page, you can program the micro-modu-