548|
Audio In/Out and the Voice Processor
▪
Use the
Delay L/R
ms of delay is available on the left and right delay lines to create effects from
flange to slapback.
▪
Use the
Feedback L/R
output signal of the μMod block back to the input to create flanges, tube and
chorus effects. Values above 90 add a high amount of gain and cause distor-
tion and higher audio levels.
Mixing in the lead voice
▪
Use the
Lead Level
the effect.
parameters to set the left and right delay times. Up to 50
parameters to re-introduces a portion of the audio
parameter to adjust the level of the lead voice mixed with