Korg Pa4X User Manual page 532

518| Audio In/Out and the Voice Processor
The factory default value is 50%. Changing the value towards 0% reduces
the correction effect and changing towards 100% increases it. Above 50%
the effect becomes more noticeable when you slide from note to note. This is
the effect of faster transition speed between your input note and the closest
scale tone as well as the fact that the algorithm is trying to pull you closer
to the target.
Mixing the lead voice
▪
Go to the Global > Mic Setup > EQ/Dynamic
knobs to adjust the level and pan of the Lead Voice.
Parameter
Level
Pan
Adding EQ, compression/de-esser and gate to the lead voice
While in the Global > Mic Setup > EQ/Dynamic
ization, compression/de-esser and gate for the lead voice.
The EQ, Compression/DeEss and Gate sections work in a different way, de-
pending on the Adaptive checkbox or menu status.
Meaning
Level of the Lead Voice
Position of the Lead Voice in the stereo panorama L99 (Fully Left)...
page, and use the
Value
-60dB...0dB
C0 (Center)...
R99 (Fully Right)
page, you can program equal-
Level and Pan