Step Time =
On
Press F and C
Step Time =
Off
Release G
(continue holding C)
Step Time =
On
Press E
(continue holding C)
Step Time =
On
Press C
Go back
▪
If you want to go back, touch the
inserted event, and set the step in edit again.
Overdub recording
When the end of the pattern is reached, the 'End of Loop' event is shown, and
the recording restarts from the '001.01.000' position. Any note exceeding
the pattern length, inserted at its end, will be reduced to fit the total length
of the pattern.
Step Time =
Step Time =
Off
Release F
(continue holding C)
(continue holding C)
Step Time =
On
Press D
(continue holding C)
Step Time =
Off
Release E and C
Step Time =
Tie
On
Press G (continue holding C)
Recording the Styles and Pads |257
On
Press G
Step Time =
Off
Release D
(continue holding C)
Off
Release G and C
Back
button. This will delete the previously