Korg Pa4X User Manual page 476

462| Customizing and editing the Sounds
recording samples or audio grooves
Connecting the sources and setting the levels
Before starting to record, prepare the sources to be sampled.
Connecting the source and accessing Sampling
1 With its MASTER VOLUME control set to zero, connect the source to be
sampled (for example, a microphone or a CD player) to the relevant audio
input(s) on the rear of the instrument. When the source has been connected,
move the MASTER VOLUME control to a position other than zero.
2 Go to the Global > Audio & Video > Audio In
the input source, and turn the phantom power on in case a condenser micro-
phone has been connected.
3 Press the SOUND
button to access
4 Go to the Sample > Record
Enabling the source and adjusting the levels
1 Use the Source
2 If you are recording from the line inputs, use the
to choose one or both stereo channels.
3 Adjust the source's volume. If you are recording with a microphone, use the
MIC > GAIN knob of the back of the instrument. If you are sampling from a
line source (like a CD player or another instrument), set the source's own
output level. If possible, set the output level of the source to be sampled to
the maximum.
button to access Sound mode, then press the
Sampling mode.
page.
pop-up menu to choose the input source.
page to set the signal routing for
Record Mode
RECORD
pop-up menu