Korg Pa4X User Manual page 179

Adjusting the send to the master effects for the Drum Families
On Drum/Percussion tracks, you can access a separate Drum/Percussion
mixer, and adjust the level of the direct (dry) signal sent from each Drum
Family to separate master effects. The Drum/Percussion channel is then
sent to the main mixer, and can use the channel's master effects.
Since the Drum Families will be processed by two sets of master processors,
we suggest to lower to zero the Drum/Percussion send level in the main mixer.
1 Go to the Mixer/Tuning > FX Send
2 Press the TRACK SELECT
Drum and Percussion
DF (Drum
Family) buttons
in the Drum
and Percussion
tracks
3 Touch the DF
ing Drum or Percussion track.
4 On each Drum Family strip, use the
direct (dry) signal sent to the corresponding FX processor (inside the se-
lected FX group).
Master
0...127
5 When finished editing, touch the
button to cycle between the tracks, and find the
tracks.
button to access editing the Drum Families of the correspond-
Meaning
FX Send level in MIDI values
Advanced editing of the Sound sets |165
page.
Master knobs to control the level of the
DF button again to exit the editing page.
Selected track
Name of the Drum Families