Korg Pa4X User Manual page 565

Editing the reverb effect
While in the Voice Preset > Reverb
Reverb is arguably the most common vocal effect. It can add a spacious-
ness that softens the abrupt beginnings and endings of lyric phrases. Many
reverb types are meant to imitate the natural sound of spaces like churches,
clubs and halls but not all. Some reverb effects are recreations of electro-
mechanical effects meant to imitate real spaces like plates and springs.
Reverbs are made up of early reflections and the longer reverberant sounds
known as the tails. There are usually controls to control the balance of room
level and tail. Additionally, a small delay can be added between the dry voice
and the reverb signal that adds clarity by briefly separating the dry voice
from its reverb. By far the most important control for reverb is the level. A
single reverb patch can have a different result for the audience whether it is
mixed quietly or boldly in the mix.
Choosing the Reverb set
▪
Use the Set pop-up menu to choose settings for the Reverb block.
Adjusting the level
▪
Use the Level
Editing the Reverb parameters
▪
Use the Decay
seconds. Note that, due to the complex nature of Reverb algorithms, a decay
time of 4 seconds may sound quiet different from one style to the next, even
when the rest of the settings are identical.
▪
Use the Pre Delay
tween the dry audio signal and the onset of reverb to help simulate larger
parameter to adjust the level for the Reverb effect.
parameter to set the length of the reverb tail from 10 ms to 20
parameter to introduces a short (up to 100 ms) delay be-
Editing the Voice effects |551
page, you can program the reverb effect.