Korg Pa4X User Manual page 778

764| Effects for the Sounds
P4EQ
a [E]Trim
b [E]B1 Cutoff [Hz]
Q
Gain [dB]
c [E]B2 Cutoff [Hz]
Q
Gain [dB]
d [E]B3 Cutoff [Hz]
Q
Gain [dB]
e [E]B4 Cutoff [Hz]
Q
Gain [dB]
PHASER
f [P]LFO Frequency [Hz]
LFO Waveform
g [P]Manual
Depth
Resonance
h [P]Phaser Wet/Dry
Src
Amt
i [P]Output Mode
j Wet/Dry
Src
Amt
0...100 Sets the parametric EQ input level
20...1.00k Sets the center frequency of Band 1
0.5...10.0 Sets the bandwidth of Band 1
–18...+18 Sets the gain of Band 1
50...5.00k Sets the center frequency of Band 2
0.5...10.0 Sets the bandwidth of Band 2
–18...+18 Sets the gain of Band 2
300...10.00k Sets the center frequency of Band 3
0.5...10.0 Sets the bandwidth of Band 3
–18...+18 Sets the gain of Band 3
500...20.00k Sets the center frequency of Band 4
0.5...10.0 Sets the bandwidth of Band 4
–18...+18 Sets the gain of Band 4
0.02...20.00 Sets the speed of the LFO
Triangle, Sine Selects the LFO Waveform
0...100 Sets the frequency to which the effect
is applied
0...100 Sets the depth of LFO modulation
–100...+100 Sets the resonance amount
-Wet, -1:99... Sets the phaser effect balance
Dry...99:1, Wet
Off...Tempo Selects
source for the phaser
–100...+100 Sets the Wet/Dry modulation amount
for the phaser
Normal, Selects the phaser output mode
Wet Invert
Dry, 1:99...99:1, Balance between the wet and dry sig-
Wet nal
Off...Tempo See
Source)
–100...+100 Amount of modulation source
the Wet/Dry modulation
DMS (Dynamic Modulation