Korg Pa4X User Manual page 443

▪
Use the Level
quency change.
EG Level
Start
Attack
Break (Break Point)
Sustain
Release
▪
Use the Time
frequency change will occur.
EG time
Attack
Decay
Slope
Release
parameters (-99...+99) to specify the amount of cutoff fre-
Meaning
Change in cutoff frequency at the time of note-on.
Change in cutoff frequency after the attack time has elapsed.
Change in cutoff frequency after the decay time has elapsed.
Change in cutoff frequency that will be maintained from after the
slope time has elapsed until note-off occur.
Change in cutoff frequency that will occur when the release time has
elapsed.
parameters (0...99) to specify the time over which the cutoff
Meaning
Time over which the level will change from note-on until the attack
level is reached.
Time over which the level will change from the attack level to the
break point level.
Time over which the level will change after the decay time has
elapsed until the sustain level is reached.
Time over which the level will change after note-on occurs until the
release level is reached.
Editing the Sounds |429