Korg Pa4X User Manual page 619

b C Delay Time [msec]
Level
c R Delay Time [msec]
Level
d Feedback (C Delay)
Src
Amt
e High Damp [%]
Low Damp [%]
f Input Level Dmod [%]
Src
g Spread
h Wet/Dry
Src
Amt
0...5460 Sets the delay time of TapC
0...50 Sets the output level of TapC
0...5460 Sets the delay time of TapR
0...50 Sets the output level of TapR
–100...+100 Sets the feedback amount of TapC
Off...Tempo Selects the modulation source for the
TapC feedback
–100...+100 Sets the modulation amount of the TapC
feedback
0...100 Sets the damping amount in the high
range
0...100 Sets the damping amount in the low
range
–100...+100 Sets the modulation amount of the input
level
Off...Tempo Selects the modulation source for the
input level
0...50 Sets the width of the stereo image of the
effect sound
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |605