Korg Pa4X User Manual page 706

692| Effects for the Sounds
c Drive Mode
d Drive
Pre Low-cut
e Output Level
Src
Amt
f Low Cutoff [Hz]
Gain [dB]
g Mid1 Cutoff [Hz]
Q
Gain [dB]
h Mid2 Cutoff [Hz]
Q
Gain [dB]
i Direct Mix
Speaker Simulation
j Wet/Dry
Src
Amt
Overdrive, Hyper-Gain
1...120
0...10
0...50
Off...Tempo
–50...+50
20...1.00k
–18...+18
300...10.00k
0.5...10.0
–18...+18
500...20.00k
0.5...10.0
–18...+18
0...50
Off, On
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Switches between overdrive and
hi-gain distortion
Sets the degree of distortion
Sets the low range cut amount of
the distortion input
Sets the output level
Selects the modulation source
for the output level
Sets the modulation amount of
the output level
Sets the center frequency for
Low EQ (shelving type)
Sets the gain of Low EQ
Sets the center frequency for
Mid/High EQ 1 (peaking type)
Sets the band width of Mid/High
EQ 1
Sets the gain of Mid/High EQ 1
Sets the center frequency for
Mid/High EQ 2 (peaking type)
Sets the band width of Mid/High
EQ 2
Sets the gain of Mid/High EQ 2
Sets the amount of the dry sound
mixed to the distortion
Switches the speaker simulation
on/off
Balance between the wet and dry
signal
See DMS (Dynamic Modulation
Source)
Amount of modulation source