Korg Pa4X User Manual page 445

Modulating the Filter EG times
▪
Use the Time Modulation > AMS 1/2
source for the Time parameters of the filter EG.
▪
Use the Time Modulation > Intensity
depth and direction of the effect that the AMS will have on the Time param-
eters. With a setting of 0, the filter EG times will be just as specified by the
Time settings.
For example, if the AMS is set to FltKTr +/+, the EG Time parameters will be
controlled by the Keyboard Tracking settings. With positive (+) values of this
parameter, positive (+) values of Ramp Low/High will lengthen the EG times,
and negative (–) values of Ramp Low/High will shorten the EG times. The
direction of change is specified by At (Attack Time Swing), Dc (Decay Time
Swing), Sl (Slope Time Swing), and Rl (Release Time Swing).
With a setting of 0, the times specified by the
used.
If the AMS is set to Velocity, positive (+) values of this parameter will cause
EG times to lengthen as you play more strongly, and negative (–) values will
cause EG times to shorten as you play more strongly.
▪
Use the At (Attack Time
Swing) and Rl (Release Time Swing)
in which the AMS will affect the Time > Attack, Decay, Slope and Release
parameters.
With positive (+) values of Intensity, a setting of + will cause the time to be
lengthened, and a setting of – will cause the time to be shortened. With a set-
ting of 0 there will be no change.
Filter 1 EG changes (Time) (AMS = Velocity, Intensity = a positive (+) value)
Note-on
Note-off
Softly played note with Attack,
Decay, Slope and Release
Level Swings set to +
Swing), Dc (Decay Time
Note-on
Note-off
Strongly played note with Strongly played note with
Attack, Decay, Slope and Attack, Decay, Slope and
Release Level Swings set to + Release Level Swings set to –
Editing the Sounds |431
parameters to select a modulation
parameters (-99...+99) to specify the
Frequency
Swing),
parameters to specify the direction
Note-on
Note-off
parameter will be
Sl (Slope Time