Korg Pa4X User Manual page 614

600| Effects for the Sounds
b: Time Over?
You can set the delay time up to 5,400msec. If the delay time exceeds
this limit, the error message "OVER!" appears in the display. Set the de-
lay time parameters so that this message will not appear. "Time Over?"
is only a display parameter.
Classic Tape Echo
This models a famous analog tape echo unit. On the original device,
"echo" was created by a playback head, and the "delay time" was speci-
fied by adjusting the speed of the motor. The warmth and subtlety of
the echoes it generated made this "lo-fi" unit a favorite with many pro
musicians.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level
D-mod
+
Right
a Time
Src
Amt
b Feedback
Src
Amt
c Tone
Tone
Low Damp
Delay
Feedback
0...2700 This parameter sets the delay time.
Off...Tempo Selects the modulation source of Time
–100...+100 Sets the depth by which Time will be modu-
lated
0...100 Sets the amount of feedback
Off...Tempo Selects the modulation source of feedback
amount
–100...+100 Sets the depth by which feedback amount
will be modulated
0...99 Sets the tone of the input.
This models the reduced high frequencies
of an analog tape delay, before the satura-
tion stage. Lower settings create a darker
tone.
This cuts the high frequencies in both the
main output and the feedback. Higher set-
tings create a brighter tone.
Wet / Dry
Wet / Dry