Korg Pa4X User Manual page 184

170| Customizing and editing the Sound sets
Adjusting the EQ input sensitivity
Extreme equalization gains can overload the audio circuits and lead to dis-
tortion. You can however trim the input to avoid overloading.
1 Go to the Mixer/Tuning > EQ Control
2 Use the Input Trim
the equalizer.
Input trim
0 ... 99
Bypassing the EQ
Each EQ can be momentarily bypassed, to check its effect while programing.
1 Go to the Mixer/Tuning > EQ Control
2 Select the Bypass
equalization. Deselect it to activate the EQ again.
knobs to attenuate the level of the signal passing through
Meaning
Attenuation value.
checkbox on the mixer channel you want to exclude from
page.
page.